Free delivery to your home [AUMLMASIG] 10Gbps transmission speed opens the era of portable high-speed GEN2 USB3.2 to NVME / SATA dual-protocol M.2 SSD portable box / supports two SSD specifications - SATA / NVEM / 10Gbit/s top speed transmission/driver-free plug and play/high-speed mobile hard disk/flash drive
●Do you often encounter these distressing and annoying things????
●Usually, the transmission speed of the flash drive is too slow and time-consuming????
●Up to 1T~2T super large file copy is too slow to affect work efficiency????
●External traditional hard disk is not easy to carry and is afraid of moving and colliding, which will cause data to disappear inexplicably????
●The solid-state hard disk box is made of aluminum alloy, which is beautiful, durable and has good heat dissipation.
●The most common USB-A connector does not need an adapter cable, abandoning the shackles of the cable, it is easy to use and convenient to plug and play.
●The main control chip supports the mainstream Nvem (PCIE) SSD or sata SSD of dual-protocol M.2 SSD, which has the best compatibility, and both SSDs are universal and convenient.
●10Gbit/s top speed transmission, the speed is converted to 1000M/s, which is twice the theoretical value of USB3.0, super fast transmission without wasting time and embarrassing time to transfer data
●Low power consumption, power saving and high efficiency, using the main control chip of the world's largest manufacturer Realtek, stable and high efficiency is your priority.
●Driver-free plug and play, no need to worry about incompatibility, any computer can use it.
●High-speed mobile hard disk/flash drive, abandoning the slow USB2.0, the transmission speed is twice as fast, and the best artifact for audio and video file transmission.
●M-Key (notch on the right) supports two protocols MVME(PCIE)/SATA, GEN2 USB3.2 TO NVME
●Mobile storage 10Gbit/s ultra-high-speed transmission
●Metal shell + motherboard
●The chip is powerful, durable, stable and fast
Equipped with Taiwan Realtek main control chip
●USB3.0 interface supports 2280 specification M.2 SSD slot
●Extensive USB3.0 common connectors
Compatibility is so high that it can be read anywhere Plug and play is convenient and fast
●Support SSD marked with NVME(PCI-e)/SATA KEY-B-M
●There are 4 kinds of fixed holes on the board
They are 22*30mm, 22*42mm, 22*60mm, and 22*80mm respectively. According to the length of the card slot in your machine, you can break the positioning line of the circuit board.
●Four-segment design supports SSDs of various lengths
Supported size specifications: 2230, 2242, 2260, 2280 Supported models (not complete examples): Samsung, INTLE, Toshiba, Kingston, Micron SSDs, etc.
●Appearance metal material
Durable and fast heat dissipation
●Installation operation
Remove the screws on the back cover Remove the screws on the main board Take out the main board and install the SSD Reinstall the main board and lock the screws to fix the main board Finally put on the back cover and lock the screws
●Easy to operate and easy to install
Step 1: Remove the screws of the back cover and remove the screws of the motherboard
Step 2: Take out the motherboard and install the SSD
Step 3: Lock the SSD
Step 4: Insert at an angle into the housing base
Step 5: Install it back in the correct way
Step 6: Lock the screws that fix the motherboard
Step Seven: Put the back cover on
Step 8: Finally lock the screws
Specification Table
Product Content Product Name: AUMLMASIG GEN2 USB3.2TO NVME(pcie) /SATA SSD Dual Protocol M.2 Portable SSD Hard Disk Enclosure
Product model: MA-M.2-USBG2-NVSA-REAL
Main control: Taiwan REALTEK chip
Support SSD: NVME(PCIe)SSD/SATA M.2SSD/
Output interface: USB-A / USB 3.2 GEN2 10Gbit/s
Support system: WinXP/Vista/Win7~11 32-bit/64-bit /LINUX/MAC
Product material: aluminum alloy + pcb
Support slot interface: m-key, b-m-key, SSD length: up to 2280
*****Free delivery to your home copyright owner welcome to order******
